Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,We can remove null route created by EIGRP when summarized from the routing table by setting the administrative distance to 255 on the router who advertises that summary. To do that it would be enough to do this:First take off the summary addr...
HiI am aware that we can influence inbound routes via 2 attributes that is:AsPath and MED. Can you guys explain what would one choose and why.Thanks,Sagar
Hi All, I have a scenario where I have two nexus 5596 as upstream and have vPC in between. downstream is the server hooking to the upstrean both nexus devices. On Both the Nexus switch the port channel is down and the VPC is also down. The phys...
Hi All,Can somemone help me understand the speed coloun of the below output, It denotes "S" & "D" beside auto. I woud like to understand what it actually refers to.switch# show interface brief----------------------------------------------------------...
Hello,I have a c7000 HP blade enclosure with 8 cisco 3120 blade switches stacked running IOS ver 12.2(58)SE1. Recently I encountered a problem when all my ssh sessions got utilized and I was unable to login so I tried to clear the session by taking c...
Hi Rick,It's not for some production. It is just for study purpose. Read on a lot of blogs as well that adding distance 255 would remove null route from local router but would advertise to other router. But now it's not happening hence wanted to kno...
MED only works well when both the remote end routers are in same AS but still if the remote end routers ( consider ISP) has configured local prefer then MED is useless.what if the both remote end router are in different AS configuring med won't make...
Hi Rob,I have faced this issue with many enclosures so far and the only option left here is, you need to reboot the enclosure.This is an issue with the IOS code and you have to open a case with HP to get the appropriate IOS ver. Probably 15.0 code ha...
Reza - My bad I mistakenly mentioned e1/10 in diagram but it is e1/1 for po701Since these are L2 switches SH IP INT BR shows only mgmt Ip Please find the requested outputs as below.nexus5596 1#sh run int po701interface port-channel701 description sn...
