Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
We have a 5-member Cisco 3750x switch stack. Our phone system management recently installed three third-party switches for their equipment and uplinked them to the stack.
Phone switch1 port g25 – Cisco Gi5/0/23
Phone switch2 port g28 – Cisco...
Hi All,
I'm looking to setup the following and was wondering if someone could answer a few questions that I have.
Setup:
At a branch office, our ISP is giving us a 20/100 leased line and an ADSL circuit to be used for failover.We are thinking of con...
Hi All,Just wanted to know what would happen when a stack member is disconnected from the stack, for example to due to a stack cable failure.Lets say the stack has 3 members and the switch 3 (not a master) disconnected from the rest of the stack. I'm...
Hello Experts,We have 2 ADSL connections from 2 ISPs going into our head office. We also have a branch office and a VPN running between the sites. If we install a Cisco 897VA or a Cisco 896VA in our head office will that be able to automatically fail...
Hi Guys,I currently have a LAN-based failover setup between two 5510s. The failover link is a crossover cable. In the current setup, if I unplug the crossover cable both units become active. From what I understood from Cisco documentation, each unit ...
Thanks Mark.
Yes we'll be doing filtering hopefully these will be alright. Am I right in thinking that the 4321 will need a data license and the 887 will need an Advanced IP license?
Thanks again for your help
Ranil