Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have two Cisco ASA 5545 firewalls. I am having a problem where every month or two the primary ASA fails to where it blocks all outbound traffic. The fix is to manually fail over to our secondary ASA, which then allows proper traffic flow. I reali...
I am trying to set up a vpn client connection to a Cisco 871. The router is running flash:c870-advipservicesk9-mz.124-6.T8.bin.
The VPN client version is 5.0.07.0440
I cannot get the authentication box to pop up on the Cisco client. I have attached...
Hello,I am using the Composite Device Health EEM that sends out an email notification once my interface is or CRC errors reach a particular threshold. The problem I am having is that I have to manually do a 'clear count' to get these emails to stop ...
Thanks for the response. I have added a log file. Its includes about 8 mins before the incident and during the incident. I have more logs, but they are for the whole day. I can parse them down a bit, if needed and post more.
I think I did the m...
So that is what i have set now-- i have failed over to secondary and have been running that as the active primary for the time being.
I have not tried staying on the secondary to see if it has the same problem. I always reboot the primary and then ...
Correct. I understand how it is supposed to work, but what seems to be happening is if I hit the 2000 threshold of input errors, I will still get the email every 600 seconds- even if the errrors have only made it to 2001 in 600 seconds. So maybe th...
I am still having issues with this. It may be because of something that I am doing worng, but once the threshold is reached, I still get emails depending on what the inteface health period is set to (event manager environment interface_health_period ...
ok, so if I set the output error threshold to 1000, then it will only send me an email when those errors reach 1000, then again at 2000, then at 3000...and so on?For testing purposes I have the output threshold set to 2. but, the output errors have ...
