About jesmondfenech

jesmondfenech · 08-15-2012

Hi,I have a vlan that is used for ip cameras. This vlan is routed with other vlans on our Cat 4506-E. how can i implement multicast feature to improve performance?Thanks Sent from Cisco Technical Support iPhone App

jesmondfenech · 08-14-2012

Hi,I am in the process to route two buildings together. Both building have the same network setup. 2 Core Switches 4506-E Chassis having glbp for layer 3 redundency on about 20 vlan in each building with default intervlan routing in place.Below is a ...

jesmondfenech · 08-27-2012

Hi Alesio,I forgot to issue that command at first, than I rembered and is issued the command and everything is ok.Thanks!!!Jesmond

jesmondfenech · 08-27-2012

Hi Alessio,For some reason, I have no option to add an IP address on my tenG interface on my supervisory engine. (WS-X45-SUP7L-E) IP Base Image. Do you know why?Jesmond

jesmondfenech · 08-23-2012

Hi Alessio,Thanks for the update!Will test this config and let you know with any output!Thanks Again.Jesmond

jesmondfenech · 08-22-2012

Hi Alessio,I was trying to start working on you configuration example and I notices that you have connected as below:B1_A to B2_B andB1_B to B2_AAm I correct? If yes I have to connect the 2 blue fibres differently from as they are on the picture.Wait...

jesmondfenech · 08-17-2012

Any help please?Sent from Cisco Technical Support iPhone App

Member Since	‎08-14-2012 05:43 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	8

User Statistics

User Activity

IP Cameras Multicast

Routing two building together help

Re: Routing two building together help

Re: Routing two building together help

Re: Routing two building together help

Re: Routing two building together help

Re: IP Cameras Multicast