About JDMJeffy84

JDMJeffy84 · 12-01-2020

Hey all,Current issue:Internal LAN clients cannot reach the AnyConnect Client. Ping, RDP or SCCM remote tool (tcp/2701) does not connect to the remote anyconnect client when established from the internal LAN.Troubleshooting:PCAP on Firepower FTD - we...

JDMJeffy84 · 08-26-2014

Hey guys,Wonder if you guys can assist me in troubleshooting a Tacacs/ AAA issue.Cisco ACS 5.3 server decided to blow up and corrupt itself on the weekend. However, I managed to build it up again with most of the configurations.I'm having trouble get...

JDMJeffy84 · 08-12-2014

Hello All,I am stuck on this issue with users reporting poor performance on the Wireless.I've tested with a few devices and I see drop packets randomly, some mobile apps timeout but works when you refresh, Cisco Anyconnect reconnects randomly and fre...

JDMJeffy84 · 05-23-2014

hello there!Wonder if you guys can help me?Currently running 7.4 on WLC 5508. Wireless is working perfectly one one subnet and SSID throughout the building.However, how can I enable client isolation?I have enabled P2P Blocking action = DropBut when I...

JDMJeffy84 · 05-16-2014

Hello all,I currently have WLC running 7.4 and would like to enable Encryption.I can see I can enable Encryption globally under all APs. My question is:- What does this encrypt? AP to Controller?- What consequences does this have other than performan...

JDMJeffy84 · 12-02-2020

Thanks Balaji, I missed a NAT rule which covered the NAT exemption which was sitting near the bottom. All working now cheers!

JDMJeffy84 · 08-27-2014

Hey Jatin,Strangely I can log into some switches and some fails gives me 'authorization failed' I managed to debug on the switch, looks like tacacs fails and drops to Local mode? The configurations are the same on all Cisco devices:aaa new-modelaaa g...

JDMJeffy84 · 08-27-2014

Your the man! I missed out Step 24, the access rule was denying all commands!If I could I buy you a drink right now!Thanks

JDMJeffy84 · 08-26-2014

The issue is happening everywhere around the building.For troubleshooting I left a spare AP in a comms room. I'm sure there's no RF frequency in the room! Again I still experience the drop outs in VPN, etc.It happens on both 1602 and 2602 APs Thanks

JDMJeffy84 · 08-25-2014

Hello, Thank you for the info.I have upgraded to 7.4.121.0 including FUS 1.7 and did not resolve the issue.I also enabled LAG, now we have 4 ports (4Gb) into the Core switches.There's no QoS configured on the switches, just default settings. I teste...

Member Since	‎03-01-2010 05:36 AM
Date Last Visited	‎12-01-2020 07:27 AM
Posts	76

User Statistics

User Activity

Internal LAN cannot reach AnyConnect Clients

Command Authorization Failed

Clients poor performance on Wireless

Client isolation - Apple Airplay

Wireless Data Encryption

Re: Internal LAN cannot reach AnyConnect Clients

Hey Jatin,Strangely I can log

Your the man! I missed out

The issue is happening

Hello, Thank you for the