Help.  Is it possible to enter multiple SNMP Community Strings or just one?  I can enter multiple Trap Hosts just fine, but I would like to have a different community string per trap host.

I have an E20.  I'm getting transmit (TX) packet loss above 15 percent.   However, my receive (RX) packet loss is 0 percent.  The distant  endpoint is the inverse - TX = 0 percent & RX = 15 percent plus.   Looking at the switch port, I've got no drop...

I have an E20.  I'm getting transmit (TX) packet loss above 15 percent.  However, my receive (RX) packet loss is 0 percent.  The distant endpoint is the inverse - TX = 0 percent & RX = 15 percent plus.  Looking at the switch port, I've got no dropped...

I've connected a PC to the PC port on the EX90.  Is there a command that I need to use to activate the interface (internal EX90 switch)?  I've changed the voice_vlan_id to the correct number and set the voice_vlan_mode to 'auto'.  But those settings ...