Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there, got a problem with the radio interface on AP350s and 1200s (11b & g, running IOS), occasionally (and not on the same units) the RF interface will lock up and any clients associated to it will not be pingable and lose network connectivity. D...
I need to disable SNMP on our complement of 350 APs. However, I've tried the normal route of disabling via the SNMP parameter (web) page but if I go back to the APs a day later somehow SNMP has re-enabled itself. I've tried turning off CDP to help th...
We have a small number of 350s that continually reboot when trying to configure them (via serial cable/Hyperterminal). I've tried the bootblock/format (resetting to default configuration) DRAM and VAR installation key thing but to no avail. Does this...
We're starting to use repeaters (using 350APs) more in our WLAN infrastructure.On testing firmware upgrades locally within my WLAN lab that contains 2 root APs and 2 repeaters (all the same SSID / WEP settings) when you upgrade the firmware to the re...
Can anybody confirm or deny whether the firmware for the 4800 can support 128-bit WEP please. We've been told by our supplier that they don't but it seems that from firmware version 8.55 onwards at least, there is a privacy option under the 802.11 pa...
Craig,Never mind, got 'em pinging! I was going too 'native' on the radio interface!Now gotta test them with switches hanging off the end of them!Regards, Paul
Hi Craig,Er, dunno if you have any insight on my issue. I'm trying to get 2 AP1231s (12.3-8) in bridge mode (root/non-root, antennas transmit/receive right) that have 4 VLANs going across the airwaves. Now, the bridges are associated, they can see ea...
This question may have been asked before, but I'll ask it again anyway, the 7920 wireless phone, it will work on a 802.11g infrastructure, correct? I'm sure read it'll only work on a .11b infrastructure, is that correct?Thanks in advance for any resp...
That doesn't work either! I removed two users from User Manager, unchecked SNMP from the remaining user, went back to the SNMP page, disabled SNMP, applied it, OK'd it. Today, in the user's profile the SNMP box is checked and SNMP is once more enable...
