About Sean Lonning

Sean Lonning · 03-22-2012

Someone has mentioned only 25 nodes are supported by the 1524SB and that one AP gets bogged down by 20 nodes or more. Is this true?Sent from Cisco Technical Support iPad App

Sean Lonning · 08-12-2010

Network Setup1 - WLC 4402 running version 6.0.196.01 - Root AP 15222 - Mesh AP 1522Multiple 3230 MAR's with single WMIC included in the stackMAR version 12.4(2)T6WMIC version 12.4(3)JL2When the 3230 roams between access points, the WMIC will roam to ...

Sean Lonning · 04-05-2016

No, you can only use the stack cable because the stack cable is capable of 480 Gbps.

Sean Lonning · 03-23-2012

Agreed. Salt is very corrosive. Wrap it in weather proof tape on all connectors and then electrical tape. Probably will have to replace coax cables on the boat since the damage has been doneSent from Cisco Technical Support iPhone App

Sean Lonning · 03-23-2012

ASDF I understand it's a PtP link but check out this guide written by Javier. It's solve many issues with my PtP links and PtMP roaming events.https://supportforums.cisco.com/docs/DOC-14944Sent from Cisco Technical Support iPad AppSent from Cisco Te...

Sean Lonning · 08-10-2010

Nortel has a Windows based client/server tool called Multicast Hammer. It works great putting the client on the receiving side to see the flow of traffic. It also works as a server too!

Member Since	‎08-04-2010 07:53 AM
Date Last Visited	‎01-29-2020 12:23 PM
Posts	14

User Statistics

User Activity

Maximum nodes for 1524SB LWAPP AP

Communication loss during roams between AP's

No, you can only use the

Re: Aironet 1310 APs dropping connections

Re: Aironet 1310 APs dropping connections

Re: Multicast monitoring tools?