Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I know this is an old topic but despite all my readings on the PFC QoS etc. etc. I cannot find a solution.Perhaps you guys can assist.We using ESM20G(2x10G's) cards for the core-facing llinks. We have ME (C7600, ME34/36/38) access network.Thi...
Oops, see you have two separate interfaces.Use this.Policy-map WAN_Inside class WAN_VLAN police cir 20971520 conform-action transmit exceed-action dropPolicy-map LAN_Inside class LAN_VLAN police cir 83886080 conform-action transmit exceed...
Hello, I recommend you use two separate pmaps on the Policy-map Intput_Inside class WAN_VLAN police cir 20971520 conform-action transmit exceed-action drop class LAN_VLAN police cir 83886080 conform-action transmit exceed-action dropInter...
It seems it has to do with the granularity of the input policer.If you not comfortable giving the customer the extra 2%, then adjusting the police CIR to give the customer their exact B/W might be the interim option.Take care.
Hi,Did you explicitly configured the bc of 50000? From my test ME34EG, IOS is calculating a bc of 1000000? Perhaps you can change the bc.CPT_Test_ME-3400EG-2CS#sh policy-map TEST100 Policy Map TEST100 Class class-default police cir 100000000 ...
