Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have a 6509 and have purchased a Sup32 and WS-C6K-9SLOT-FAN2 (to replace the standard tray - WS-C6K-9SLOT-FAN).Unfortunately when I try and slot the new tray in, there is a 1 - 2mm gap at the bottom and it doesn't connect with the back plane...
HI everybody,I'm having a load of trouble changing the vlan's around on my access point. I used to simply have the 'core vlan' traffic and the management IP (on BVI1) on the same vlan (60) and obviously therefore the same subnet.I now want the 'core ...
Hi,Yes I hadthe native VLAN configured properly on the switch but it still wasn't working.It turned out to be something weird with ARP as I was getting incomplete ARP entries on the AP.In the end I upgraded the supervisor in the 6500 and the IOS on t...
Hi BilalBilal Nawaz,Thanks for your quick reply. I went to check whether the screw holes line up correctly and to be honest, lost my temper a little bit. I pushed the tray in pretty hard and it seated itself correcly and the fans started spinning. I'...
