Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have WCS v.5.0.56.2 running on a converted WLSE. My alarms and events are showing the wrong time, they are 5 hours off. I went into the console of the WCS and verified that the hwclock and date are set right within it and they show the correct ti...
Your switchport configuration should be set to trunk mode for each access point. Look at this for assitance: http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665ceb.shtmlThen enter in the command on the switchp...
I see that you do not have dot11 arp-cache enabled on all AP's, I would recommend to enable that on all. Also, I do not see any QoS in your configuration in giving priority to Voice. What does your switchport configuration look like that is connect...
I ran into the same issue about a month ago. It is a known bug. The bug ID is CSCsi68680. You can look-up that bug and the only known workaround is to restart the Call Manager. Well I told TAC that I just restart the Call Manager Service, which s...
