I have the following configuration
I have about 50 internal hosts that have static nats assigned with their respective services defined in the nat statement which I need to remove as I need to use dns-doctoring.
This is the config:
object network ...
I would like to route traffic for a particular host on the internet (e.g 9.9.9.9) through our outside interface (e.g. 7.7.7.0/27) instead of client's internet connection.I already added 9.9.9.9 to the split dns acl so that the route is inserted on cl...
Hi,We are looking to purchase a 5512-X with AVC and Web Security but I was told that if we choose the Web Security feature, all traffic is tunnelled to Cisco's cloud servers for inspection.Is this correct as we wouldn't like this to happen?
made a mistake earlier, I should have included this one:
object network LB-TEST2-TESThost 10.0.0.52
I found out what happened though in the meantime, the host LB-TEST9 has 2 ip addresses and the primary interface is set to another nat statement. T...
adganjoo I'm testing using whatsmyip.org so since the source port is dynamic in this case LB-TEST2 is returning 4.4.4.4 but replies from source port 80 should be translated to 1.1.1.2 as you said.
How do I make LB-TEST1 translate to 4.4.4.4 like th...
