About Florian Reuschenbach

Florian Reuschenbach · 02-02-2018

Hey Folks, I have a customer where the following issue occurs: He has multiple users configured in CUCM. CUCM and IMP are running for a long time. Now he has created a new user, but the user is shown in Jabber without any phone number. When having ...

Florian Reuschenbach · 02-06-2018

Jaime, Thanks for your reply. That solutions fixed my problem *thumbsup*

Florian Reuschenbach · 09-17-2012

Yes, I read this as well; but for my server it worked with just one update and I didn't get any errors (during or after the update).I just posted to give you a field report of my server if you're not shure if you can install this version directly. Bu...

Florian Reuschenbach · 09-17-2012

Hi Daniel,it was just 1.1(1d) to 1.4(3p) directly (via the Cisco Host Upgrade Utility Image and this Guide: http://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/cli/config/guide/1.4.1/b_Cisco_UCS_C-Series_CLI_Configuration_Guide_141_chapter_011...

Florian Reuschenbach · 09-17-2012

Hi Daniel,last week I tried to update an UCS C210 M2 with a delivered firmware of version 1.1(1d) up to 1.4(3p). After the update I read about the minimum requirements, but I couldn't find any nonworking areas on the server.So, in my case, the update...

Member Since	‎09-17-2012 12:32 AM
Date Last Visited	‎04-09-2019 02:33 AM
Posts	5

User Statistics

User Activity

Jabber4W Contact Phone number not shown

Re: Jabber4W Contact Phone number not shown

Upgrade CIMC and BIOS from 1.1 to 1.4 for C200 M2

Upgrade CIMC and BIOS from 1.1 to 1.4 for C200 M2

Upgrade CIMC and BIOS from 1.1 to 1.4 for C200 M2