Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
At least 16 ports 10/100/1000 VLAN switchGRE tunnel interfaces that support multicast1 or 2 RUCisco pulled support for tunnel interfaces in the workgroup switches, and ISR series routers NMs only go to 10/100. Do you need to go to a 6500 to get that...
I have a market data vendor who continues to insist on using directed broadcast. I need to put their circuit outside a firewall. Can I do something like:static (inside,outside) ftp 65.220.255.255 10.1.255.255 netmask 255.255.255.255 0 0Along with ...
Has anyone successfully used this? I had an idea to use it, in combination with global (inside) interface and a static statement to allow a router outside a firewall to pass RIPv2 md5 updates using neighbor statements to routers on the inside of the...
Be sure the 3550 has "no synchronization" in the bgp config unless you are running an IGP and have all BGP routes injected into the IGP. Otherwise the 3550 will not advertise the routes.Also helpful to use "next hop self" when configuring iBGP peers...
I just installed 6.2 on a PIX 525. I was worried about your post since it would affect me as well. I set up a temporary access list to allow telnet sessions from an outside host to an inside host. Sessions stay up for as long as I keep them open. ...
