Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have a small subsidury with 3 remote office sites, laptop users can move between each office. The laptops are configured with static ip addresses so to get around the problem of not being able to move between sites we have the same VLAN LAN sub...
Hi,I have a scenario where I may need to change the EIGRP AS number within my company. The network is pretty simple and eigrp is primarily used to support our branch network. What we are looking to do is share some branch infrastructure with a subsid...
Hi,We currently have a DMVPN which connects 3 offices from subsidury A to its network . We have a requirement to connect another subsidury which has its own routing table the same infrastructure but what I would like to do is logically segment subsid...
Hi,What's the best practice for DHCP at remote branch offices? Configure DHCP on the Cisco routers or use the Microsoft DHCP at Head Office?Of course if the WAN goes down the branches will have no ip connectivity but all applications are accessed ove...
Quick question, we are looking into designing a new WAN for our branch network which consits of 100 branches over an MPLS Cloud. Which tunnelling mechanisms would you recommend. Looked into DMVPN and GET VPN, any others I should be looking at? The br...
These are small remote branch offices which will have resilient WAN links. Just really wondering what others do. We are looking to move to a serveless branch so DHCP on a local server at the branch isn't an option, that leaves me with DHCP on the l...
Hi,Just one final question. Am I ok to configure a secondary RP on my secondary Nexus? Am I correct in thinking the system elects the device with the highest mapping-agent IP address? Thanksint loopback 100description interface used for RP Addressip...
Hi,Thanks very much for your reply this could be a life saver. Our access switches which are combination of Cisco4507RE and Cisco 3750 switches connect to the Nexus switches via layer 2 trunks. Do we need to consider any multicasdt configuration on ...
Hi Joseph,Thanks for the quick response. We are using SUp 6-E Supervisors so maybe this explains it."Catalyst 4500 Classic Supervisor switch ports can be configured to statically trust CoS, DSCP, or todynamically and conditionally trust Cisco IP pho...
