Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm looking to build out a cloud environment with a vendor, and need a site-to-site VPN to be established between the vendor's environment and my environment. Since I am using a Cisco ASA 5510, they have suggested the use of the software-based Sophos...
I have a WAP321 that I want to designate for guests. The WAP is trunked to a Cisco 2960 via the native VLAN, and the switch is trunked (Etherchannel) to the inside interface of an ASA 5512. The WAP has a static IP address of 10.1.1.20/16, with defaul...
I have 3560's in my current environment, operating in the core/distro/access layers. The switches are in a star configuration, performs only layer 2 switching, and utilizes copper (no plans on moving to fiber).With a fairly limited budget, I've been ...
I'm looking at the possibility of purchasing a few 3750 to build a switch stack to replace my current core and access switches. I'd like for the stack to support server, SAN, and user traffic, as well as provide simple switch management, redundancy, ...
I have a remote user who currently has a Cisco VoIP phone that connects into our network via TFTP. He informs me that the phone drops several times throughout the day, with an occasional drop in VPN from time to time. His router has the most curre...
Update: I performed a factory reset and reconfigured the WAP. Once I connected to the Guest SSID, and opened my browser, I was redirected to the Captive Portal. This issue that I'm seeing now is that all the images are broken.
Yes, it's an iSCSI SAN (Lefthand) using ordinary Ethernet NICs.I'm interested to know more about MEC. I know MEC can only be configured on stacked switches (in this case, the 3750X's). Are there any specific configurations that need to be applied to ...
Interesting. So would the solution of replacing the current central node with a stacked 3750X and trunking the existing switches be optimal, considering budget constraints? Can I use 2960S switches instead of 3750X's?
