See Attachment if screenshots dont show up We host our multipoint calls on Codian 4501 running 4.5 and wondering how to fix the issue below:When multipoint call plus one endpoint sharing content = large content and all the video endpoints bunched int...
I am looking to add a VCS C and VCS E and create a cluster with my existing C and E. The 2nd set will be deployed in a different site. What kinf of traffic passes between the servers? Is there any QoS requirements for media between the servers or is ...
FolksI have a VCSe and VCSc with TMS. All the endpoints sit on the internal network and register only to the Control. I also have Jabber/Movi users who register within the network and at times outside from home. These Movi users hit the Expressway an...
Can anyone shed some light on how TMS scheduler chooses what MCU and in which order. I want to be able to force TMS to select MCUs in a specific order, ie MCU 1 if not MCU 2, if not MCU3....if not TS7010. Thank You!
Folks I have users who work from home and or outside of the corporate network using Cisco Jabber for Telepresence AKA Movi. We allow them to register to the VCS expressway from the outside to use Jabber. There are a handful of users who cannot regist...
Thanks for the help! I will look at the remote layout settings... I have heard about the multi stream with CE8 (I think?) and we do have a TPS, but I have read its only available with SX20, SX80 and MX700/800....no love for C or EX series which I hav...
So when I turn off content for the MCU, the endpoint "sharing" loses its video which isn't ideal, but I get that its now using the video channel to push the content through....Also ends up being 4CIF - low resolution. Content is not readable.
Content Status - EnabledDisplay Content in normal vid channel - enabledVideo fast update - disabledweb viewing applet b/w - 384kbit/sMarkup of content channel video - disabledauto content handover - enabled
Attached the pictures/screenshots Endpoints involved:C20, EX90 and Jabber(Movi) Content Settings under Bridge : Content Status - EnabledDisplay Content in normal vid channel - enabledVideo fast update - disabledweb viewing applet b/w - 384kbit/sMarku...