Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Is there a know issue or what version of IOS supports ISL on gig ports to dot1q on fast Ethernet ports.Task:Pass multiple VLANs for Cisco APs with 1031 and 1200 series.Switches; 2950s, 3500s and 3550s 1. Currently switch configured with switchA gi...
This might be bit old thread... Yes, you can remove it by adding new entry with lower sequence number. Let's say you have ACL 120.access-list 110 deny icmp any any redirect log<zapped>1. sho ip access-l 12010 deny icmp any any redirect log<zapped>!...
Hi,switch (enable) set span 5/1 5/2everything on 5/1 will copied to 5/2Use Ethereal, wireshark or Microsoft Network Monitor 3.1 to capture the data.Connect your pc/laptop to 5/2 and start either above application and start to capture it- show span to...
Arif,Are you upgrading Sup720 and MSFC?show system highavailability Make sure your system is sys high enabled Step1: backup, upload the image, modify boot file...etc.- copy currently running configs on both L2 and L3 to TFTP server- Copy ios on L2 an...
I seen this problem before....Your current issue is with Windows NIC Bindings.- control panel- open network connection- click on Advanced from tool-bar- Select Advaned settings- Move UP/Down NIC for the first or use for your network.