Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there any way to stop the telnet daemon on a 1605 with IOS 12.0.(4)T all together?? I have removed the vty password, but when you run a port scan on the serial interface, it still shows that telnet is listening. Can this be done or should I just...
I have been doing some monitoring of a router for bandwidth utilization. I’m alittle confused on the stats on the bottom of the graphs…..Max Out 946.2 kB/s (7.6%) <----What is that percent telling me?? Does that mean the max out used 7.6% of my T...
Hi, your going to have to ad a route statement in the PIX pointing the new subnet to the router.......something like this......route inside 10.10.10.0 255.255.255.0 192.168.1.1Hope that helps....
Hi, You should try and install a newer client (3.5.2). When you uninstall the client remove everything, profiles, certs etc.... Don't forget to reboot after you uninstall and after you reinstall. Thats probably going to be the first step the TAC eng...
Hi, the allow local LAN access is used by the concentrator. You can't use it with a PIX or router yet. Here is a document on the client, and also if you http to your concentrator, browse to your groups, modify your group and click on Help at the top...
Hi, can you guys post your configs so we can take a look. Sounds like your nonat statement is incorrect or sysopt connection permit-ipsec is not in your config some how....
Hi, just to add.......are you running DNS or WINS on your W2K box at the office?? If so, are you getting the correct DNS or WINS IP information when you connect to the 506? If you can ping by IP address or map a drive by IP , your split tunneling i...
