Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am currently upgrading a WS-C2960-PC-L switch to the latest IOS version, c2960-lanbasek9-mz.122-52.SE.bin. Everytime when I do console login from power off then power on the switch, it will only show the login banner, but no login prompt, then for...
Hi,I am running into a problem where I have created 2 separate VLANS, and would like to have communication for some device to communicate with other devices in other VLAN on a single 3750 switch.Here is what I've donecreated VLAN 10 and 20SVI VLAN 10...
I don't have other workaround for this. But it seems only happen when first to power up the switch with AAA configurations and tacacs/radius server assigned, and if the switch is not able to find the assigned tacacs/radius server, then there will ha...
The new version, 12.2(50) and above has default timeout which is about 180 sec, after that time frame, local login will be available. It would be great if anyone knows how to remove the authentication timeout if the tacacs+ was down.
Hi Raj,Thanks for your response. Yes, this is a brand new switch, and I also had a configurations added to the switch. The problem exist only when I upgraded to the latest IOS, which is the version 12.2, 52. When connnect to tacacs server, the swi...
Hi Tony,Try to read this discussion. This may be close to your questions you had. http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=LAN%2C%20Switching%20and%20Routing&topicID=.ee71a04&fromOutline=&CommC...
