Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just in case you folks had not noticed, CallManager 3.1(1), ART 1.1(1), and BAT 4.2(1) are all available in the Software Center now, at http://www.cisco.com/cgi-bin/tablebuild.pl/callmgrNote that BAT (and TAPS) and ART are available at the link above...
Can Unity be configured so that it will "say the numbers" of the caller's number who left a message? I noticed by looking at voice messages through email access that the calling party number is recorded but I would like to hear it through the TUI whe...
Hello, if you look at the Release Notes for Cisco Unified Video Advantage version 2.1 posted here, you will notice that Windows Vista is now supported in this version. I believe the expected release date for 2.1 is in the 1st quarter of 2008.http://w...
You might figure out ways to accomplish setting up an environment like that, but you will not be able to accurately reproduce the upgrade steps you will encounter with the real systems, due to the fact that your real upgrade will require a complete r...
Without knowing the full details of the setup, I am guessing that the 3825 is not configured to expect the full number to arrive in the Setup message... that is the default behavior.On the first POTS dial-peer which contains the E1 PRI's voice port, ...
Hi David,If you take a look at the following link, in the "Considerations, Caveats, and Restrictions for AutoQoS VoIP" section, it seems that for WAN connections, you can only use the Auto QoS feature for Serial interfaces using HDLC/PPP, or FR or AT...
