Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello.I have the problem with AP1852, i tried to joned the ap to WLC 2504 with 8.5.171 software version .On AP logs i saw fallow:[*07/11/2021 00:08:27.4705] ethernet_port wired0, ip 10.15.1.6, netmask 255.255.255.0, gw 10.15.1.1, mtu 1500, bcast 10....
Hi all.I have 2 WLC 5760 (version 3.6) in stack and 20 APs .All APs registered on WLC but operation state in both radio is DOWN .APs connected on different switches.What can it be ? Thanks
Hi all. I wanna do a wifi with web auth via question "How old you?" and if client click the button "more 18" he get access to wifi , if click the button "less 18" don't have. I have the WLC 5508 with 7.0 version software. As i think, need the web a...
Hi, I have a router 7606 and i did PPPoE server, but i have a same problem.Some client connect via pppoe but have bandwith no more 60kbit/sec.I tried to change IOS but it doesn't help.this is config:interface Virtual-Template1 ip unnumbered GigabitEt...
Hi Guys.I have one problem.The scenario is from ISP get full view in VRF OUT on WAN1 , then export route from VRF OUT to VRF CUSTOME1 on AGR1 (WAN1 and AGR1 is cisco 6509). I want export only default gateway from VRF OUT:ip vrf OUT rd 333:1 export ma...
Hi, i tried to make factory reset ( use reset button) and tftp update the AP.One time the AP joined to wlc, but SSID doen't broadcast from AP, after reload AP doesn't joined to WLC .
