Here are directions on how to change the OAMP password: 1. Stop Operations Console Service 2. %CVP_HOME%\bin\mgr-init -install 3. Start Operations Console ServicePlease note that this procedure should only be used if the old pas...

When Unity receives a call, it looks at the Forwarding Station field to determine what greeting to play, etc. Since you are sending the call directly to Unity, the forwarding information field is empty, and you get the opening greeting. I recommend c...

Thats fine, Im just warning you that you may run into problems, and that there are much easier and safer ways of doing this. Also, if you do run into problems, you will need to contact Microsoft as this has nothing to do with Unity.-Dustin

I am afraid that this is not going to be that simple. I have had to do this before, and it was NOT an easy process. The information store will not startup and read the priv.edb file and chug along happily.I spent many hours (6+) reading through Mic...

Also make sure you assign the phones a Calling Search Space that can 'see' the appropriate Unity ports.Have you read this page yet?http://www.cisco.com/warp/public/788/AVVID/part_css_tn.htmlTrust me, it helps.-Dustin