Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi There Thanks in advance. We are trying to upgrade all our 2960 switches to the same image [12.2(58)SE1] using ciscoworks. Switches running image 12.2(55) are successfully getting upgraded but switches running 12.2(46) are failing half the way d...
Hi All; We are a big Campus LAN network with 2960G series on the access layer and 6509 in Core layer and we want to deploy QoS. As recommended we want to classify and mark the traffic at the access layer. We got more than 150 types of traffic whic...
Hi; Thanks in advance for the help. We are planning on upgrading IOS images on our 6500 VSS boxes from SXH3a to SXI3. Could someone advice me whether there are any problems in doing so and did anyone face any problems while doing so?Regard...
In nexus 5K switch profile configuration is synced only through Mgmt 0 interface. Make sure you configure the Mgmt interface on both switches and their reachability. Configure the Mgmt 0 ip address for vpc domain peer and switch-profile sync peer and...
Hi Shahul, Since 12.2 (33) SXI1, they started supporting ISSU (InService Software Upgrade) which reduces the downtime on the end devices connected to the VSS Boxes in a multihomed.Have a look at the below link for any questions:http://www.cisco.c...
VTP V3 adds some security features into VTP likePrimary Server - You can have only one primary server in your domain and only the primary server can update the vtp domain.Secondary Server - You can any number of secondary servers in your domain for b...
A layer 2 switch does not use the DHCP snooping binding table for switching or routing purposes. The switch creates the table from the DHCP offer packets received by the user end ports and uses the table for securing the network at the access layer ...
