Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm currently using WebVPN portal to access an internal web application. As I understood the router/firewall make a rewrite of each url by adding following information /PORT/IP_ADDRESS/resource. For example if I access (internally) http://192.168....
I spent a lot of time trying to permit interface range in command set, from ACS (5.2) userguide is stated:Arguments are matched using Unix RegexpI tried several different approaches the only one who worked for me is:FastEthernet ([1-9/])*0/([1-9]|1[0...
If you ever wondered how to launch the ASDM directly from your linux terminal, here a simple script that will make you happy.Please remember to add execute privilege to the script:# chmod +x asdmYou may also copy/link it to a default dir has /usr/bin...
Dear All,I've spent half a day traying to solve this without success, I hope you could help me.I've configured a simple 802.1x solution on a pilot PC that have to authenticate via PEAP-MSCHAPv2 users against my ACS Internal User database.Switch versi...
Hi there,I'm trying to configure a PPTP tunnel for remote users to access inside network resources, before enabling the firewall (ZBPF) all worked perfectly, tunnel comes up and worked perfectly.Once I've tried to define zone-pair/policy-maps the VPN...
Hi jrabinow,Thanks a lot for the reply, I've upgraded to 12.2(58)SE2 and it worked...I still receive the invalid attribute error but now at least the ACL is applied to the interface and the authentication result is successfully!
Yes, I've used this procedure to bind the LDAP group to a specific group policy for the SSL VPN and, as I've understood, this works only for VPN...How can I bind a Group Policy to my authentication rule? I think is not possibile, but there are surely...
Hi,Thanks for the reply, unfortunatelly in the website you mentioned there is nothing on LDAP Group but just on LDAP authentication via ASA...Any others?
Hi Dmitry,It was the first thing I tried, but unfortunately it didnt work, as seen in my configuration I search the username in the attribute sAMAccountName and in the Group the user are part of the member attribute....I also tried to change de Attir...
Hi Farrukh,Thanks a lot for the prompt reply, I'd already discovered the sites you have mentioned.The question is how can I find out the commands (in the "snmp-server enable traps" way) from the MIB files for my IOS version?You know, my target is to ...
