We have several dozen SG3x0 switches in our network. All switches work flawless and are accessible via ssh. Only the web-interface does not respond. Basic SSL-negotiation seems to work – we get the Firefox "Illegal Cert – proceed with caution" mess...
Hi, we have set up an ASA to connect our external(provider)- and internal networks. A NAT-rule forwards IMAP-SSL traffic from the external address to the internal mail server. This works well for users in the Internet and from Wlan. From the inte...
Hi, we are looking into migrating our network (20 servers, 50 desktops, 4 VLANs) from 100 Mbit to Gigabit Ethernet. There are several offerings from Cisco that I am trying to distinguish. The SG 300-28 or 20 seem fully featured at a low price. ES...
Thanks for your tip. It turns out, it was a combination of the URL-rewriting to IP-numbers that the SG300 web-interface does and a badly configured proxy-sever.
Yes, we did. With tcpdump we see first packet but no connection beeing established. The ASA gives us TEARDOWN message. Seems like the problem described in DOC-17810. Did not get the suggested state-bypass configured. Fabian
Hi Jouni, after spending some time trying with different solutions we think we habe an asymetic-routing situation here. The answer is described in https://supportforums.cisco.com/docs/DOC-17810. But we are not succeding to apply this pattern for t...
Hi Journi, we implemented your solution and it seems to work - half-way. We are now receiving packets from the internal net, but the connection is not established. We see the following messages on the ASA:%ASA-6-302014: Teardown TCP connection 144...