Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi group,
Trying to configure Hierarchical Modular QoS on Cisco N540 series (N540-24Z8Q2C-M). IOS XR version 7.5.2
The following command gets rejected during commit. Has anyone encountered the same?
"conform-action set dscp ef" under QoS policing con...
Hi All, We have two DAD links configured on our Cisco 9500 StackWise Virtual switches. Both the DAD links originally used GLC-SX-MMD over MM fibre. We found that any changes to the DAD link would bring down the DAD link and required a reload of the s...
Hi All,I have recently had multiple reloads on two of our routers (ISR 4451-X) installed at different sites. I can't find any crash logs after this sudden reload. It could be a crash of the Kernel which I believe do not produce any logs.Has anyone en...
Hi All,Cisco TAC have advised a fix for this issue. (see below link)However it is best to raise a ticket with Cisco TAC and follow the procedures advised by them rather than go ahead with the upgrade procedure described in the link.http://www.cisco.c...
Hi,Due to the large number of ISR4451 routers in our network, we had an internal discussion with Cisco. Unfortunately, I cannot comment on the outcome of these discussions as they are confidential.Please raise a TAC case with Cisco and confirm with T...
