Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Anyone face the same problem with the following IOS Version?MLS QOS is not supported in global command.Switch#sh verCisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSALK9-M), Version 03.03.00.XO RELEASE S...
Hi All,Anyone face problem with their ASA5512 with the following behaviour?The firewall hang after a period of time like 15days and above & required to reboot the firewall. All interface is still PING able from either outside, inside & DMZ. However, ...
Hi All,I'm having problem configuring Client VPN in my ASA 5512 running ASA 9.02. I've tried multiple configuration but still not working even using the VPN WIZARD in ASDM.Please advise if i missed out anything.There is no response when i try connect...
Hi All,I have a situation where i need to NAT all the Server IP in LAN to another IP range due to NSOC monitoring. On top of that, i need to create a Client VPN setup at the same router. I managed to configure it, but not able to PING any of the inte...
Hi all expert,Current i'm having problem with my AP running with WLC. For example, 1 AP in a room with 30 users, they are having throughput/slow connection problem.Just want to know, if we dun add another AP but instead add-in 5GHz antenna, will it i...
mine is with the following. Still trying to figure out why. *osapiBsnTimer: Mar 17 12:58:05.949: f8:16:54:07:a8:78 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!*apfReceiveTask: Mar 17 12:58:05.949: f8:16:54:07:a8:78 apfMsExpireMobileStation (ap...
I'm facing this issue at the moment. Wireless Client for Guest get disconnected between 10-20minutes.WLC: 7.6.130.0 - which is Cisco Suggested releaseNAC: 2.1.0Based on the bug below, known fixed release is 7.6(130.1).https://tools.cisco.com/bugsearc...
Ok, if i understand correctly, there are no way that i can set to only allow machine with certificate to access to the wireless.In the current environment, both DC & NPS falls under the same box. Yes, currently only machine in the domain can logon to...
