Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to change the ID for a vlan and would like to minimize the outage for migrating the hosts. Our environment are Nexus cores using a VPCs to 5ks. The SVI for the vlan resides on the Nexus cores and only L2 on the Nexus 5ks. For example I have ...
I am a seeing QOS issue with our 4510 switches. When performing a file copy using a Windows client from our NetApp SAN, I am seeing the output drop counter increment when the auto qos policy is applied to the client interface. The copy will start o...
I am planning on performing a ISSU upgrade to a pair of 5510 nexus switches. When I run the show install all impact command, it states an issue with a vPC port-channel and bridge assurance being enabled. I have the read that best practice for vPC i...
I have layer3 switch with 3 vlans on it. One of the 3 vlans, I don't want to it be used for intervlan routing. So I need it not to show up as conneted in the routing. This one vlan is really just Layer 2 traffic, but since I am running DHCP for th...
I am looking to find a command or counter to tell me if a cisco switch port on a 4510 was ever up and passed traffic. I want to shutdown all unused switchports on our access switches. But before I do that I need to make sure device is just not off ...
I agree.My understanding is that the VPC peer link should be set as network. The VPC member ports should be set to default normal type. This is how I have my environment configured.
Thanks for the reply. I like your idea around the HSRP group and might look into it. But I think I might take your advice and not create a loop on the core.
