Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, my question is the following, I have to migrate the WiFi network from a WLC to Meraki, the issue is that between the WLC and the APs I am passing all the VLANs through the capwap tunnel, in addition the traffic goes out through the WLC in sepa...
Hello Dear, I need your help, I have to install model c9105axi-a APs, but I see that these are recommended only for offices, not to be a high-rise installer, the issue is that the client is requesting to install APs in the access hall At a height of ...
Hi Guys,I need some help with my CUIC Report.My problem is I have a CCXE v9.0.2 and CUIC Serverv 10.0.1. I need rescue a report, modify it and then import the CCX, I've been following the steps recommended, but I was impossible to import the report, ...
helloI have a controller configured on the ACS, the ACS also connects to an AD, when a user tries to connect do not see any log in the ACS. With autonomous APs, the APs were created in the ACS and the users had no problems to validate the AD, in this...
Hi DarrenOC.First of all, thank you for your support.Yes, I did indeed save the configuration. I also doubted that and to clarify, I configured all the parameters again, but the problem occurs when adding the APs to the Network. At that moment, many ...
Hi DarrenOCThank you for the idea, we presented it to the client and he liked it. Now, another question: on the Meraki Dashboard I have configured all the VLANs and DHCP for the networks that we will use, but when adding an AP, the "Security & SD-WAN...
Hi KarstenI.I forgot to tell you that, at this moment we only have Meraki APs, the rest of the equipment is Cisco C2960x Switches plus two Cores, one model C9300 and the other is a C9407, both in separate Data Centers.
