Hello community, PE CE --------------|.....| ---------------------------------------|.....| MPLS multilink PPP via E1 I am looking for a solution for the fo...
Hello!There are the one RADIUS-client (IP:10.10.10.60) and two RADIUS-server (IP:10.10.10.15 and 10.10.10.16).The ACE module needs for balancing RADIUS requests between RADIUS-server. It is need tobalance the Radius requests based exeptionally on the...
Hi!I have tried all options of ping . I thought too it should be reachable. I can work from CE too. It is not working from both side. The IP of local and remote interfaces are unreachable.
I have founded out follow from the documentation of the ACE:"The ACE does not load balance RADIUS accounting on/off messages. Instead, it replicates those messages to each real server in the server farm that is configured in the RADIUS LB policy.:
Of course, there is a some log.Certainly one thing is clearly (from the test) that the RADIUS-client and RADIUS-server are directly working correct. In this case the all calls are successful.I have run the sniffer. The sniffer have displayed all righ...
HiThere is other config with the sticky, but the result is the same.Two RADIUS servers are active: For example the RADIUS client send 10 reguest and all these request are successful. On the RADIUS servers site I see that have been received 15 calls (...
