Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Going to upgrade UC from 11.0 to 11.5 SU2 - latest release. Just want to make sure i'm reading the documentation correctly. Do I need to install any COP files? Maybe ciscocm.cuc_11.5SU1_pre_upgrade.cop.sgn ?
I'm planning on just going into OS ad...
Question about connecting devices to the NM-10G line cards on a 3850. I know these are uplink ports and not designed to connect up to a host - but what about a VMWare host? I've connected a 3850 10G port to a fabric interconnect before and it worke...
Having a p2p meeting between 2 DX80s. Video quality is poor. The guy is registered to a CUCM 10.5 - cisco switches/routers. 20meg circuit. I have a solid 8mbps between each endpoint during a file transfer. I don't think i'm having bandwidth issu...
Working with someone who HAS to use the Cisco VPN client 5.0 for whatever reason. Here is config I have. From the client i'm getting error message 412: The remote peer is no longer responding. Users who are in the 'now' using AnyConnect can get on...
Let me preface this with saying thank you and yes this is one of those questions where 'it depends' and it has multiple answers. Just looking for some other opinions. So when architecting a L3 switch for a customer. Lets say we are working with sma...
thanks for the response. I asked because i'm under the impression that connecting a host up to a 10G line card port on a 3850 will work - however it is not a best practice and you'd want like a 4500-x or something since the line card 10G ports are d...
Yep - found in the Regions where the default setting was 384 for Video. I up'd it to 1920 and created a device pool for these guys with this new region and everything looks good. Thanks again for the help.
OK - got the duplex settings fixed. Video is much better. In call statistics I noticed we are running 640x360. Any way to make that resolution atleast double? The bandwidth should be there so I'm not sure why it is so low. Thanks again.
Thanks for the response. I have a couple of questions.1 - How would one 'pull up the call statistics'? Is this done in the call manager or can I get this from the DX80 directly and how?2 - If it is negotiating to a lower quality like 360p, how can ...
