Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi i have Cisco 2821 with 2 subinterfaces on the G0/0, with 2 different VLANs on them.When i copy about 60 Mb/s between them, the CPU usage increase to 80-90 %, and start to drop the packets.The CEF is on on all those subinterfaces.Any recommendation...
Hi ,I have to migraste current IOS conditional NAT to our new ASA 5515x.However the NAT misses the possibility to define it via access lists.I've found something about the twice NAT, however i didn't find the way how to implement it.Here is the curre...
Hi I'm running Anyconnect 3.0 with user certificate, however I'd like to get rid of the annoying message everytime i'm loggingWhen i connect to ASA i get :1. Your client certificate will be used for authentication - and i have to confirm the Group f...
hi guysI'm using IOS 15.2 and under this version i cannot obtain the startup-config under certain privilege level ( in this case it is 7 )i have no problem to get it from the earlier version, also from 15.1Router#sh privilCurrent privilege level is 7...
Hi I deployed Anyconnect 3.0 on our ASA 8.4. I have created several VPN profiles with different ip pools. However it's quite unknow for me how can i apply the ACl for this particulat ip pools.If i applied the ACL on the INSIDE interface , they don;t ...
thank youthat is what i was looking forhowever it has one disaadvantage: The change will take effect once the clinet is re-connected to the proper profileAnd if you have hundreds of users it's quite complicetedPet
