Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to NAT some subnets to one IP and other subnets to another IP. The range command want work because some of the subnets are out of order.For example subnets 192.168.1.0 - 192.168.7.0 and 192.168.25.0, 192.168.28.0 nat'd to 1.1.1.1. subnet 192...
I am trying to diable aggressive mode, for security reasons. I have a Cisco 3825 running c3825-advsecurityk9-mz.124-24.T2.bin. When I disable aggressive mode with ROUTER(config)#crypto isakmp aggressive-mode disable , I am unable to connect. The sys...
Does the new 5500 WLC support multiple Web Auth login pages? I want to consolidate my WLCs to a central location and possibly just one controller. I have several different guest wireless networks for different departments and each has a customized We...
I have 2 autonomous 1230's about 25 yards apart, with computers spread out between them. Both AP's are on the same VLAN and use the same SSID. Most of the computers associate with 1 of the APs. I want to make it so that each AP has a equal number of ...
I am using the Cisco VPN client to connect, so there isn't a way to disable aggressive mode. But from what I just finished reading.. The only way to use main mode is use certificates, if you use a PSK(which I do for the group) then aggressive mode h...
