Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So - I'm trying to figure out how to get a subnet distributed down an EIGRP and BGP path from a data center to a site through an MPLS network. The subnet in question is 10.80.0.0/16 An example of a subnet that IS getting learned from the same R1 is 1...
Keep in mind this isn't the entire config, but can I just QoS based on ip access-lists and matching class/policy maps alone, or do I need to dig way deeper?Also, is QoS bi-directional in this case (return traffic also treated the same)? Or do I need ...
Hey guys.. having issues taking my current knowledge and applying it to an old ASA running 7.x. Basically I want to perform the following:- Any Traffic sourced from 192.168.1.0/24- Destined for 10.100.90.0/24 (Over an established VPN Tunnel)- Needs ...
I'm thinking this is possible, but I just can't figure out how to set it up.Obviously I can group devices together however I want, but can I apply an Identity Store Sequence to one group of devices, and a different sequence to another group of device...
Yeah I get that. So here's the kicker. Each remote site, has 3-4 different paths to any given data center over redundant MPLS, and redundant P2P links. Don't ask why ALL of that is there, I'm new here and we're in the process of reducing links righ...
Right, R2 is where I'd like to make the change to affect R3/R4. SO you're saying I need the 10.80.0.0 aggregate statement, as well as a component route that matches that, such as "network 10.80.0.0 0.0.255.255" under the BGP process?
OK, so technically, I'm not doing anything to prioritize these packets, and my config is incomplete? What I'm gathering form your answer is that I need to apply these to an interface, along with bandwidth guarantees and/or priorities? My end goal I g...
