Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
IntroductionPrerequisitesRelated Information IntroductionThis document describes options for deployment of vPC Peer Switch. When a Virtual Port Channel (vPC) is configured and operational, the Spanning Tree Protocol (STP) continues running on both vP...
This document provides the configuration example for deploying OTV in the Data Centers having multiple VRFs. TopologyThere are two Aggregation VDCs in each data center having three VRFs Web, App and DB. Both the Data Centers are connected via two 10 ...
OTV provides ARP optimization by locally caching ARP entries and responds to ARP requests locally which reduce the number of ARP broadcast packets forwarded across the OTV cloud.When a host in Site 1 sends ARP request, OTV edge device forwards the AR...
OTV adjacency is formed across the layer 3 multicast clouds by exchanging L1 ISIS Hello packets.Sample Topology 1. Verify IGMP V3 JoinAfter the OTV configuration completed, enabling the join interface sends any source IGMP v3 join on that interface....
Hi, you are correct. If you use virtual Data centers with VXLAN and you don't have vlans extended to physical network, then you don't have the requirement to use OTV.Thanks,Anees.
Hi Jerry, I am unable to see any public facing document with the specific configuration you are looking for. But please give me a day, I will publish the config fromone of my deployment.Thanks,Anees.
Hi Richard,http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/guide_c07-728315.pdfCan I Mix a Cisco Nexus 7000 and a Cisco ASR 1000 for OTV?Mixing the two types of devices is not supported at this time when the devices will be placed w...
