Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The live IP for our ASA that is used for management and AnyConnect VPN is failing the PCI scan. Shows the IP using SSL 3.0 and TLS 1.0. I had a look and it seems like SSL 3.0 and TLS 1.0 are my only options in the drop down menu. Is there anyway to g...
We have Trustwave for PCI Compliance Scanner. Recently they scanned us and came up with this error "SSL Certificate Public Key to small" Says it is currently 1024 and needs to be 2048. It shows our public IP on port 443 for what it is trying to talk ...
After a recent firewall cleanup we now are failing a PCI Scan from Trustwave. I have created a rule to allow their IP's to come in any port and I am still getting a "Network Service Stopped Responding" on there end while they are going to our Public ...
I'm a bit confused on how this works. 3 of our branch offices or in the same area around Kansas city. We have and Olathe, Kansas City, and Liberty branch there.In the route patterns for the 816 area code I have:9.1816XXXXXXX Olathe-TollByPass-RGL9.81...
I am having trouble with a RV220W and I don't know why it won't work.I have 10 VLANs setup (including the default) and DCHP setup for all the VLANs, there are 4 LAN ports on the router.DHCP for the vlans are 192.168.VLANID#.100-254/24Port 1 set to VL...
Is there a command to see what our PAT rule for our general public IP is translating to on the inside so I could find the devices that trustwave is actually talking to?
