Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
MaadenRIY#sh ip cef exact-route xxxxx.196.129 172.31.1.50xxxxx.196.129 -> 172.31.1.50 : Serial1/3.1 (attached)What attached means?what is the benefit of using CEF on Router. is it any advantages for router?
Dear all,I'm facing lot of errors and CRC on LAN interface. any one can help to determine the problem where,I'm connecting Fastethernet to Mentat accelator and then to PIX firewall. all interfaces touch the router configured full duplex and 100Mbps. ...
I need a way to monitor router interfaces status with history records.I configure the router snmp-server trap-source f0/0snmp-server host 172.17.1.26is there any option that can help me to monitor all the sites router interfaces.I'm also using wt's u...
I got these two message on the router. Any help in this issue.27w2d: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.27w2d: %FAN-3-FAN_FAILED: Fan 6 had a rotation error reported.
Hi All,I have:Router 1720. 1- serial 1- ehternetModem (tellaps-stu 2304). Cable from router to modem.I want to connect this router for leased line with modem through telephone line,Can any one give me what is the requeirments for this connection? and...
But when I configured the link with Half dublex I got lot of collisions and deferred and both are increased with average of hour monitoring? is it normal situation and have to believe it?
Thanks all, I have tried to make it half duplex. after monitoring there is no errors appearing.?But I'm affraid if that will affect the performance?Is it OK to leave it half?
here is hardware for F0/0cable is showing amber this means there is a lost in cable or mismatching i confused now :)? but still 123 input errors, 123 CRC, 60 frame increased? Maybe missmatch with Mentat accelator? sh controllers f0/0Interface FastEt...
Thank you for your replying, I'm accept with you that MRTG is good, but the required thing is to how to monitor the interface uptime?thank you anyway. I'm using logg with kiwi it's good but not given history. for history I'm trying to use wt'sup gold...
