Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi!
Got in trouble on Cat4509 VSS cluster (8E SUP) after reattaching one of two VSL links. Now resources only connected to the second node cant access to recources on the first and vice versa. But from the core we can see everything. It doesnt show a...
Hi! We had 5 member 3650 stack. I removed #4 and reconnect #3 to #5 and #5 been hang (all ports off, no management). After rebooting #5 it fall to status "syncing" and then "removed". So for now i have this situation:
*1 Active 5897.bdab.6780 1 V0...
Hi! We have voice gateway ISR2821 with dual E1 port module and two PRI from different ISPs connected. It is configured as below:
clock timezone GMT 3 0network-clock-participate wic 0
controller E1 0/0/0 pri-group timeslots 1-31 service mgcp!contro...
The goal was to remove member #4 from the stack and reconnect member #5 to #3 bypassing #4. But it didnt go well. So for now i have losted #5 and errors on the main stack.
Still don`t understand how to provide the correct pinout scheme, here we have pinout from standard T568B
what pin/pair numbers from the table are match to the picture?
