Greetings! I have some doubts about the behavior of a scenario with Web Authentication and Timeouts configured. In this company there is an SSID with Web Authentication and it has the following timers configured: Session Timeout.........................
Hello everyone, After testing Wired 802.1X with Machine and User Authentication using EAP-TLS the customer is not satisfied with the results again. Even though it was explained before that certificates must be deployed prior to the implementation of ...
Hello everyone,
I'm facing this issue with one client: I have implemented Wired 802.1x with EAP-TLS, Guest access for guests with sponsor, and profiling.
First, the client didn't accept the use of anyconnect for 802.1x because of the delay it car...
@Francesco Molino wrote:HiYes certificates can be triggered automatically.You can use GPO to push it while giving a small session timeout when a laptop connects to the network.Thanks for your answer Francesco. Can you please explain how can I achieve...
Thanks for the answer. I don't remenber what is the default configuration for 802.1x in Windows Wired Ethernet Card when you enable 802.1x service, but I found the solution: I have to enable the following: "fallback to unauthorized network access"
T...
I've already found the answer for anyconnect on Cisco documentation:
"You can configure a single authenticating wired connection to work with both open and authenticating networks by carefully setting the startPeriod and maxStart such that the total...
El nuevo switch no formará parte del arreglo a menos de que lo conectes a través de un cable de stackwise a través de los puertos de stack.La distancia máxima de un cable stackwise es 3m. así que asumiendo que la distancia a la que se encuentra este ...
Sorry for the misunderstanding. I'm going to upgrade from autonomous to lightweight with the same conditions mentioned in the original post. That is, I have autonomous access point LAP1231AG and LAP1310, and we are going to move to a WLC 2112 with so...
