Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I am having issue in my network 4500CORE switch with vlans and dhcp-server------>2900 access switches.
someone connect linksys router in one of access switch in the network and it act like dhcp server clients gets wrong ip address any...
HI all,
I need some help i have router 1900 with NAT but its getting restart when i sh logg i can see this error.
%IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
Full logg
*Jul 4 20:03:38.599: %IFMGR-...
Hi all,
I had a wan router (eth0/0 public-ip/eth0/1 LAN )20/20 up/download dadicated link NAT is enabled everything was working perfect but since last 3 days every 30 min or so net gets drop or port gets hang we just unplug wan cable and plug it...
Hi, All I have A network with 4 vlan,s10,16 DATA 30 IPTV40 CAMERASbut this ip is shown in all vlans 239.255.255.250 my tv channels streaming ip address range is 239.XX.XX.XX vlan 30 is this have any issue with other vlans like flooding or can i den...
HI all, I want to use this (entservices) its showing active but not in use how can i do that ? CORE1#sh license summary Index 0 Feature: entservices Period left: 1513 weeks 1 day License State: Active, Not in Use, EULA accepted...
I did Increase the value of max-reassemblies till now didn,t C this error %IP_VFR-4-FRAG_TABLE_OVERFLOW
Show version saying :normal reload
About this error :%IPC-2-INVALIDZONE: Invalid IPC Zone i did some search saying that could be bug and fixed i...
Thank you sir,
I did increase ip-virtual rbut now i am getting these errors
*Mar 1 00:00:06.531: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = ipbasek9 and License = ipbasek9*Nov 2 10:47:08.599: %IFMGR-7-...
Thank You Sir ,
Router was working without any issue with same config and conectivity more then 6 month this just happend since last 3 days that port changing state.
i just put this command (ip virtual-reassembly max-fragments 64 max-reassemblie...
HI Mr JON, I don,t know you are still available or not but i am facing a issue with same network i added one more ip head-end (DVB-Streamer) but traffic flooded on stb middleware ip head-end and all STB,s are in same vlan 30.Streamer,s bro...
Hello Akash, Thanks for repley port 1/0/27 is configured as trunk and allowed Vlan Allinterface GigabitEthernet1/0/27 switchport mode trunkthis is sh cdp ne V35#sh cdp neighbors Capability Codes: R - Router, T - Trans Bridge, B - Source...
