HelloI'm having trouble with VLANs and can't pin point where the problem is. Up until now, I've only been using the default VLAN1 on my wired network.I have a 877W which used 2 vlans for WLAN, but everything else, all wired devices resided on VLAN1 ...
HelloI have an 857W which I configured to use different VLANs / IP ranges for LAN and WLAN traffic.This works fine for traffic from both LAN and WLAN to access the internet.The issue is that I want WLAN and LAN to be able to be able to communicate, b...
HelloI have a 857W with ios 12.4(6)T7 Cisco IOS Software, C850 Software (C850-ADVSECURITYK9-M), Version 12.4(6)T7, RELEASE SOFTWARE (fc5)However it doesn't appear to have WPA2 functionality.That is, AES ( aes-ccmp ) is not an option in the confi...
HelloThanks everyone.On the comment from leolaohoo I swapped out the 857W for a 877W and changed/swapped the IPs/VLANs to different ranges/numbers as it's been one of those "one day" projects I never got to and figured since I was probably going to h...
Hello, thanks for your response, I don't have access at the moment but I'll implement your suggestions tonight.In terms of the ACL, should the list be applied to the interface matching the destination specified in the ACL ?If so, I'll try the followi...
Yep, upgraded the IOS (to c850-advsecurityk9-mz.124-15.T14.bin) and WPA2 now working (after a bit of reconfig due to ssid config now being global rather than interface context)
I looked on the Cisco IOS platform/vesion compare page and am pretty sure it confirms the version of IOS is the issue : I'll upgrade soon and hopefully that solves the issue
