The 887VAG+R7-K9 router is giving me much grief.
This time it's the unstable ezVPN tunnel. Sometimes there seems to be an endless loop where a successful tunnel build-up seems impossible. A power-cycle might help, or a erase config->replace config do...
Greetings!
Let me give you a layout of my configuration
[Cisco 887VAG+7-K9 (15.3(3)M4)] <<=== VODAFONE CELLULAR ===> INTERNET <=== LOCAL ISP ===> [Cisco ASA5512-X (9.3(1)]
The 887VAG router connects over the cellular 0 interface by ezvpn as a ...
Hi all,This is my first post on the support forms and I only just got my CCNA, so please bear with me and don't shoot me if I pose a slightly newbish perspective on things. Thanks in advance. We've got a central office (actually quite small) w...
Hallo Abaji, Thank you for your insight and reply!The DPD is enabled on both ends of the tunnel. The ASA has the DPD enabled in the tunnelgroup and the 887VAG+R7 has the line "crypto isakmp keepalive 60 5 periodic". I do believe that's the correct wa...
DOH!It was a bug in the 15.2(4)M4 IOS software.When I upgraded to 15.3(3)M4 and put the outside ezvpn interface back to dialer0 the problem was resolved!(When I had vlan2 as the ezvpn outside interface the behaviour was the same as with the 15.2(4)M4...
This works excellently! Thank you very much. However, for some reason my EZVPN Client stopped working.I've changed the outside VPN interface from Dailer0 to VLAN2 (dialer0 is my atm dialer which is now IP unnumbered, and VLAN2 is now my WAN VLAN). Th...
