Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,we have two Cisco 3560 switches are connected with Gig (Trunk) port.Now we noticed Gig is reaching full and we need to upgrade.i was thinking to use port channel load balance using two Gig ports on both switches.we want Port channel will wor...
Dear all,we have multiple Links in our network and Running STP to manage it.but when link changeover, CE Stop communicating to PE until we "shut" and "no shut" on our switch port connected to CE.if we do not do shut, no shut it takes few hours to sta...
Dear Team,we have our own ASN and /24 public IP advertise by ISP using BGP. two WAN Links from ISP to us. ---------------------->Our Router ISP Router ---------------------->we want to configu...
Dear all,we have our own public IP and want to advertise globelly with two ISPs, ISP1 primery and ISP 2 secondry.if primery link is down secondry will advertise our prefix,ISP 1 (AS 100) ISP 2(AS 200) | ...
Dear allwe have three Offices Site A, Site B and HQtwo offices are conncted via MPLS data link to HQ.we have connecte other SP to get internet access.HQ can access site A and B and Internet but sites cant reach HQ network. only sites cant reach HQ a...
Dear Milan,this is Direct Connection But passing via Multiple switches And eBGP is running between CE and PE.P2P IP configured between CE and PE.Regards vikas
Dear MS,thanks for post,that post has multiple ISP BGP peering.we have only one ISP, both links are terminated on same router at ISP side.please assist.
