Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I am having some troubles with client roaming on a 5508 controller running firmware 7.3.101.0. As soon as a client roams outside the range of an AP they lose data flow and do not seem to transition to another AP for about 1 minute.This is a s...
leolaohoo wrote: Can you post the output to the command "sh run-config no-ap"?System InventoryNAME: "Chassis" , DESCR: "Cisco 5500 Series Wireless LAN Controller"PID: AIR-CT5508-K9, VID: V01, SN: FCW1453L095Burned-in MAC Address....................
Here is the config (with sensitive information removed);config sysname REMOVEDconfig time ntp server 1 REMOVEDconfig time ntp server 2 REMOVEDconfig advanced probe limit 2 500 config advanced probe-limit 2 500 config advanced 802.11a channel add 36 c...
There is definately 100% coverage infact the AP's do overlap quite a bit in some areas (closest AP's are around 20-25 meters apart).They are roaming using the same SSID but some clients do have multiple SSID profiles setup. Basically there are 3 SSID...
