Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello --We are using VTIs in a hub and spoke configuration that are statically configured on the routers. When there is no traffic traversing through the tunnel, the tunnel goes down every 60 minutes for approximately 20 seconds and then it comes bac...
I have installed CiscoWorks 2000 on Windows 2000 Server and it functioning properly but I am unable to access Campus Manager applications from clients. The clients are currently running Windows XP SP1 with Java 1.3.1 (downloaded from Cisco Website)....
Hi AJ69, Are you trunking between the switches? Cisco does not recommend either leaving them in Server/Client or Transparent mode but many enterprises prefer transparent mode for the following reasons:This practice encourages good change control, a...
Did you get a chance to check how your clocking is configured? The above information shows that you have 24 slips per seconds. The presence of slips on T1 line indicates a clocking problem. Here is the website:http://www.cisco.com/en/US/customer/t...
Hopewell2, Have you verified if the Physical connection is good at both ends? If the physical connection is good then check how clocking is configured on your routers.In most cases, one site as internal clocking and the other as line clocking.Site ...
If your VPN concentrator resides on the public side, the following website explains how to configure a VPN Concentrator to authenticate users to ACS server.http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a0080...
