Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,The Capacity Mgmt team gave me this for investigation.Serial NoInterfaceBandwidth31-Oct1-Nov2-Nov1SwitchA GigabitEthernet1/0/10 (Gi1/0/10) - *** L2 Link to SwitchB Gi4/27 ***10 MBit/s226.5 329.6 214.7 They reported that the 10Mbps link is ge...
I am doing a project to to capture the Syslog from the switches and routers, so for most of devices i can generate the syslog by giving the command " send log" and so that i would receive the same locally as well in the tool.Note : These devices are ...
Hi All,I have a topology were, im using a Switcg 3560(L2), and a Router.. and 10 Systems connected to the Switch ( Access Ports- Port Fast configured).Highlevel Diagram:SYSTEMS(A) (VLAN100) >>ACCESS>> Switch(Sw1) >>>> TRUNK>>>> Router(R1)Eveerything ...
Hi Team,I am in need to run some script on Cisco ACS Server 5.3.Which i am trying to do but its not possible.I am able to login using the credentials but not able to execute the commands.I've found somthing like "Authenticating Using keyboard Interac...
Yes, I do suspect the same , the same would have happened, Can u confirm me, if they would have used 10BaseT OID to poll this information.Coz i got confused , that Cat 5 supports (10Mbps) and was suspecting Cat5 cable might be used for trunks. Can u ...
Hi Neno, Please find the requested info below,;------------------ On SwitchA ---------------------------SwitchA#sh run inter Gi1/0/10Building configuration...Current configuration : 385 bytes!interface GigabitEthernet1/0/10 description *** L2 Link to...
Yes !! i was also not able to view this..i found this in our customer environment where the issue was on one particular device which has reached the EOS\ •1. As this device reached EOS, so TAC cannot be opened and traceback cannot be decoded.•2. ...
