About Olivier ARRIGHI

Olivier ARRIGHI · 08-28-2018

Hi folks, I have 2 switches C6824-X-LE-40G running VSS on 4 x 10Gbits/s ports. I'm willing to upgrade the VSL to 2 x 40Gbits/ links. Any way to do it without disrupting traffic? (everything is attached to this stack correctly using etherchannels disp...

Olivier ARRIGHI · 10-06-2015

Hi Folks, i have a few issues with ISG regarding the handling of customers when the ISG router crashes or reboots.I'm using option 82 with DHCP, and clients can connect correctly to the ISG router.The ISG generate a static route toward the QinQ custo...

Olivier ARRIGHI · 09-07-2014

Hi Folks I have a 10008 with PRE4 and I'm willing to monitor bandwidth entering Nickel ASICSAs this bandwidth is limited to 11.2 Gbps per half chassis, I want to make sure i'm not hitting any limitation.Show command and/or mib info very welcome Thank...

Olivier ARRIGHI · 03-11-2014

Hi folksI have a radius pushing an AVPAIR ip:sub-qos-policy-out to a virtual template for clients connected to a BRAS through PPPOE.The AVPAIR is correctly applied to each and every pppoe session but the following link http://www.cisco.com/c/en/us/t...

Olivier ARRIGHI · 07-15-2013

Hi FolksI'm using a Freeradius with local username database (no LDAP) for authentication.(working well)I have various network devices in my network, and I would like to have custom authorization per user per device :I would like to have 2 types of ne...

Olivier ARRIGHI · 05-26-2016

oops

Olivier ARRIGHI · 10-20-2015

Thanks Manuel for the trick. It does work.However, this is to remind that it is not really vrf aware. You might be able to use it in a vrf if ftp source interface is defined in the box with a vrf (to be tested) but in my case, ftp source interface co...

Olivier ARRIGHI · 10-12-2015

Thanks for your help, i'll try this later this week and will post results;)Cisco says it is a flat file used to store the database, do you know if this is scalable with 15K users?By the way, do you know a reasonable dhcp lease for those 15K ftth cust...

Olivier ARRIGHI · 10-04-2015

Hi You can still use some keepalive with ISG : policy-map type service KEEP keepalive attempts 2 protocol ARP!policy-map type control TESTRAD class type control always event session-start 5 service-policy type service name KEEP 20 authorize aaa li...

Olivier ARRIGHI · 07-31-2013

Hi Ravithanks for the URL, however this document does not indicate how to authorize per device AND per user.have funolivier

Member Since	‎07-24-2003 09:55 PM
Date Last Visited	‎07-11-2024 11:43 PM
Posts	42
Total Helpful Votes Received	23

User Statistics

User Activity

Upgrading VSS link from 4 x 10G to 2 x 40G

ISG Reboot and subscriber database/static routes issue

bandwidth monitoring of Nickel Asics in cisco 10008 PRE4

Radius accounting for QoS pppoe policy-map

Per-device/per-user AAA authorization with Freeradius

At some point I have to

Thanks Manuel for the trick.

Thanks for your help, i'll

Hi You can still use some

Per-device/per-user AAA authorization with Freeradius