This document includes a few vPC failover scenarios tested in 4.2 release. In this document, output from N7k1 is in black and output from N7k2 is in blue. Each scenario starts with '#) <test scenario>' and ends with 'SUMMARY'.
This document is a lab demo which shows how OTV can be set up in a multicast core environment. It includes sample configurations, show outputs and packet captures.
This document is a lab demo which shows how OTV can be set up in a multicast core environment. It includes sample configurations, show outputs and packet captures.
Hi Seifeddine,1) You must use N7K-M132XP-12 for the vpc peer-link. Here is the reference URL:http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx-os/interfaces/configuration/guide/if_vPC.pdf-look under "vPC Peer Links""You can configure a v...
Hi Nguyen,You are hitting the limitation here. You cannot mix source ports and source vlans within a single SPAN session. Here is a reference URL:http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst3560/software/release/12.2_55_se/configur...
Hi Nguyen,Just wanted to be clear. You would like to monitor traffic sourced from g0/1 on switch 1 to g0/2 on switch 1 AND monitor traffic sourced from g0/1 on switch 2 to g0/2 on switch 1 as well. So basically, you only have one sniffer that conne...
