Hey guys.
I know that this is probably such a simple question, but i have been searching for hours for a simple way to route 5 external numbers to 5 SIP phones in the CUCM (the phones are already registered and working fine internally) .
I already ...
Hi Alli´m having some problems with Windows based connections in specific ports.I can see in the connections statistics that ports 445, 3628, 135, 138, 139 and 389 presents the follow error: PT AD Int Error 172.20.1.119:4304 172.20.221.3:135 ...
Thanks Jaime,
The GW part is done.
But i don't see exactly where in CUCM, at the CSS page, to configure the internal phone number to be redirected to when the DID number that is called from outside.
At Elastix, i use the "inbound route page" to se...
Hi Nicolas.Thanks for answer.I looked device by device in the path and i didn´t found anything that could modify this packets. I really belive that is a BUG or Hardware issue, because i have the same structure in other customers and is working fine.I...
Hi all!I solved this issue using a "workaround" procedure:1 - deregister the module using: cms deregister2 - use the command: no primary-interface GigabitEthernet 1/03 - Then use the command: primary-interface GigabitEthernet 1/04 - cms enableBUT WAR...
I had a problem exactly the same. After hours of attempts, solved the problem by adding an ACL on the outside interface. Strangely enough, it worked for me. Good luck
